Reasons Your Water Heater Isn't Functioning
Reasons Your Water Heater Isn't Functioning
Blog Article
Here down the page you will find a lot of good quality content related to What Would Cause My Electric Water Heater to Stop Working?.
Lots of modern residences utilize an electrical water heater for their heating system, because of its convenience and also simplicity of use. Nonetheless, much like any other electric home appliances, troubles might arise with its use, unexpectedly. It can be truly frustrating to awaken to a cold shower as opposed to a hot one or having your bath with water that isn't hot enough and even too warm. Whatever the case may be, hot water heater issues can be fairly stressful. Fortunately, we've made a checklist of possible options to your water heater problems. There are a number of aspects that can trigger most of these issues, maybe an issue with the power supply, the electric burner, or the thermostat. Before doing anything, guarantee you turn off the primary power supply for safety and security. Whatever the issue is, getting it dealt with should not present too much of an issue if you comply with these actions:
Check Your Power Supply:
As fundamental as this might seem, it is extremely essential. Without adequate power, your water heater will certainly not function. So the first thing to do when your water all of a sudden stops working is to validate that it isn't a power problem. Inspect if the fuse is burnt out or the breaker tripped. If the circuit breaker is the problem, merely turn it off and on once again. Change any broken or damaged fuse. Examine the appliance with power after these changes to see if it's now working.
Examine the Burner in the Water Heater:
If it's not a power problem, then attempt looking into your heating element if it is still functioning. Test each of your heating elements to make sure the issue isn't with any one of them. If any one of them is damaged, change that component and then check whether the hot water is back on.
Check Your Thermostat:
If your water heater still isn't working or the water appearing isn't warm sufficient, you might require to examine the temperature settings on your upper thermostat. Guarantee the circuit breaker is switched off before doing anything. Open the gain access to panel as well as press the red switch for temperature level reset over the thermostat. This must aid warm the water. Transform the breaker back on and also examine if the trouble has actually been settled.
Call A Specialist:
If after changing all damaged components and also resetting your temperature level, the hot water heater still isn't functioning, you might require to call a professional plumber for an expert viewpoint. The issue with your heating unit could be that the hot and cold taps have been switched or it may be undersized for the quantity of warm water required in your house. Whatever the case may be, a specialist plumber would certainly aid fix the issue.
Final thought
Water heater troubles are not constantly major. Many of them result from small issues like a blown fuse or damaged burner. Replacing the faulty components ought to do the trick. Nevertheless, if you are still unable to solve the trouble, give a call to your nearby plumber to find to get it repaired.
Common Reasons Why Your Hot Water Heater Isn’t Working
Water Gets Too Hot
Ouch! You wanted a hot shower, not boiling! If you have a newer model electric water heater, your water heater works with a thermostat (actually, two thermostats). If this thermostat has been jostled — or purposely reset — by someone in your home, the water flow will be much hotter than you expected.
FIX: Adjust the thermostat to a more moderate setting for producing hot water. Forty-nine degrees Celsius is recommended to prevent scalding.
Water Doesn’t Get Hot
This is the opposite of the previous problem, but it’s almost as bad. Your flow of hot water is merely lukewarm or even incoming cold water. Once again, an incorrect thermostat setting, or a faulty thermocouple in a gas water heater, could be to blame. Another explanation might be that there’s no power to the water heater (in the case of an electric heater) or the pilot light has gone out (if you have a gas unit).
FIX: Adjust your thermostat as necessary. If that doesn’t do the trick, check the power supply. Another possibility is the replacement of a damaged thermocouple in gas water heaters.
Leaking Water Heater
A leaking water heater (a sign may be low hot water pressure, or not enough hot water to shower) might be a reason to push the panic button… but first, take a few minutes to check where the leakage is coming from. Leaks near the top of the heater tend to indicate a problem with a valve, which won’t need a major repair. However, a leak from the water heater base is more serious.
FIX: You may need a qualified plumber to replace your drain valve or TPR (temperature pressure relief) valve. When your water heater is leaking from below, your plumber might be able to fix it if you call them soon enough. Otherwise, you will need to have a new water heater installed.
Noisy Water Heater
Sometimes your water heater might make some peculiar noises, loud enough to compete with your singing in the shower. Are these a cause for alarm? It depends on exactly what kind of sounds you are hearing. Sizzles and rumbles are both red flags, indicating a heavy sediment buildup in your hot water tank that might cause a breakdown in the near future. In addition, banging is a sign of a water hammer, which can lead to serious damage to your pipes.
FIX: To stop sizzling or rumbling, turn off the tank and have it flushed by a reliable plumbing company ASAP. Ask your plumber to install a water hammer arrestor to quiet down the banging and save the pipes.
Pilot Light Keeps Going Out
Many pilot lights go out once in a while, but when your water heater pilot light keeps going out continually, it’s a problem. And the chances are good that that problem stems from either a shortage of combustible air or a malfunctioning thermocouple.
FIX: Increase the air supply around your water heater by cleaning dust and lint off the appliance and clearing any clutter from the area around it. A bad thermocouple will require expert plumbing repair and is more than basic gas water heater troubleshooting.
Water Smells Bad
The water from your residential plumbing pipes should smell neutral. If it has a strong unpleasant odour, something’s wrong. To check whether your water heater is at fault, turn on a hot water faucet and let it run for a few minutes. And, yes, use your nose to determine exactly what you are smelling.
FIX: For a garlicky odour, relight the pilot light on your water tank. When you detect the scent of garbage, you’ll need a professional plumber to flush the hot water tank and possibly replace the anode rod. A strong smell of rotten eggs could signal a hazardous gas leak; turn off the gas supply if possible, get everyone out of your house, and make an emergency call to the gas company.
Water Looks Brown Or Rusted
The first thing to do is ask yourself, “Is the brown, rusty-looking water coming only from my hot water taps?” If the answer is yes, then most likely, either the anode rod or the water heater interior is starting to rust, especially if your hot water heater is nearing the end of its life expectancy. (A “no” answer means the issue does not originate from the hot water heater but rather from the water supply.)
FIX: Contact a plumber to inspect the water heater. If you catch the problem quickly enough, it might be fixable. Otherwise, you’ll need a water heater replacement. Consider installation of an efficient new tankless water heater.
https://www.huskyair.com/blog/hot-water-heater-isnt-working/
I discovered that piece of writing about How to Troubleshoot and Repair an Electric Water Heater when doing a search on the internet. Kindly take a moment to share this blog post if you liked it. Many thanks for your time. Kindly come by our site back soon.
Book Now
Report this page